• PRODUCT INFORMATION

A classic silhouette with an underlying twist. That’s the Morgan jacket. The first of its kind in our Heritage collection.

Where Adventure and Heritage meet
Combining features we use in one segment into another is not unknown at REV’IT!. So when we took the idea of an inner lining ventilation panel that can be opened and closed – currently used in our Offtrack (Adventure) jacket - and put it into the Morgan, it made total sense. The inside of the jacket is lined with a windstopper material, but open the custom made, lasered ventilation panels, and air can freely flow to the body. That’s also thanks to the perforated full-grain cowhide panels at the front.

Keeping it classy
With a high collar, a wider-in-the-shoulders and tapered-toward-the-waist fit, and seamlessly integrated slit pockets at the sides, the Morgan jacket ticks all the boxes when it comes to being classy without shouting too loudly. Furthermore, its CE AA classification, included SEESMART elbow and shoulder protection, and safety seams help to keep you looking good and staying protected on the road.

• FIT OF THIS PRODUCT

Fit

Slim fit
The Slim fit is designed to enhance the body's natural physique, creating a sleek and sophisticated look. It features a closer cut that is more tailored and slenderer, emphasizing specific areas of the body. Despite its slimmer profile, the Slim fit still provides ample comfort and freedom of movement where it's needed.

• COMFORT FEATURES

Adjustability

Adjustment strap at waist

Pockets

Inner pocket

Slit pocket at waist

Lining

3D mesh

Mesh

Polyester ripstop
Polyester ripsotp is a lightweight fabric with special fibers used within the weave at specific points, allowing for the fabric to have strong resistance against further tears.

Features

Wind collar tab

Cuff zipper
The zipper at the cuff has several purposes. It allows for easier entry into the sleeve, provides extra ventilation on warm days, and allows you to easily wear the glove cuff under your outer shell and over your base layer.

Jeans loop
The loop at the back of this jacket enables you to attach it to your jeans, which prevents the jacket from creeping up: no more exposed back when riding your bike.

Short connection zipper

• CLIMATE REGULATION

Insulation

Detachable thermal body warmer

Internal windblocking window
Because of this garment’s inherent ventilated nature, it also contains the unique internal windblocking window to keep the cold out on chillier rides. In warmer temperatures, simply unzip the side of the wind-blocking panel/window, roll it down, tuck it into its own pocket, and ride on. When it gets colder, simply close it, like you would with a window. A smart solution to have generous on-demand ventilation and wind blocking.

Wind catcher behind cuff zipper

Wind catcher behind front zipper
Behind the front a panel has been installed to block the wind.

Ventilation

Ventilation panel on center front

• PROTECTION IN THIS PRODUCT

Protection

Ready for Avertum Tech-Air® airbag system - ONE SIZE UP
Under this garment you can wear our REV'IT! Avertum Tech-Air® Airbag - or a Tech5 airbag - if you purchase the garment one size bigger than your usual size. If you wish to wear a garment that is marked as ""Ready for Avertum Tech-Air® airbag system"", you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation: 1. Measure chest circumference and divide the measurement by two; 2. Measure garment flat on chest line; 3. If the difference between point 1 and point 2 is 12 centimeters or bigger the garment is suitable to wear on top of the airbag. Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.

Prepared for SEESOFT CE-level 2 Insert Back Protector
The back protector pocket in this REV'IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV - an easy upgrade to maximize safety.

Safety seams
The stitching in motorcycle garments contributes greatly to the abrasion resistance of the total gear. This is why REV'IT! uses safety seams on garment areas at increased risk of impact. Safety seams have a visible as well as an invisible seam. This construction keeps the material of the outer shell together, even when the visible seam is thorn.

SEESMART CE-level 1 Shoulder Protectors

SEESMART CE-level 1 Elbow Protectors

Outer shell material

full grain soft cowhide

Visibility

Reflective label at back
Retroreflective, fluorescent label at the back to aid visibility and improve safety in low-light situation.

• WASH & CARE

Outershell

	Do not wash
	Do not bleach
	Do not tumble dry
	Do not iron
	Do not dry clean

Removable thermal liner

	Machine wash 30°C, mild cycle
	Do not bleach
	Do not tumble dry
	Do not iron
	Do not dry clean