Home / LEATHER / Argon 2

Argon 2

Code :

FJL141-1270

GC :

☆☆☆☆☆

(0)

In Stock

1,490.00 ₾

თვეში 141₾ -დან

Add to Cart

Product Details:

PRODUCT INFORMATION

Expanding upon the Argon 2 family (including the one-piece and combi suits) we bring you the Argon 2. An entry-level, race-derived, full-leather jacket for street riders with speed in their DNA.

Good genes
The Argon 2 jacket carries the same race aesthetic as part of the Argon 2 product family. We made a couple of changes to diversify it though. The prints are similar to the one-piece but reversed, additionally the jacket has the same prints as the combi suit. More ergonomic perforation has been added to keep you cool plus the suit is build for high-speed riding, enabling the wearer to take corners at high speeds. How is that achieved? Well, the suit is aggressively pre-shaped and uses the same materials as the Argon 2 racing suit.

Built-in safety
With a AAA CE classification, you know you’re in good hands with the Argon 2 jacket. Furthermore, TPU hard protectors at the shoulders, along with interior armor at the elbows and shoulders come standard - the divided chest protectors and the back protector can also be added at your request.

FIT OF THIS PRODUCT

Fit

Tight fit
The Tight fit is designed to be snug and conform to the rider's body shape. The contouring design ensures that the material and fabrics move with the body, without restricting the range of motion in any situation. This fit is mostly found in base layers and in our race-oriented garments.

COMFORT FEATURES

Adjustability

Adjustment strap at waist

Pockets

Inner napoleon pocket

Slit pocket at waist

Three inner pockets

Lining

Mesh

Features

Comfort cuffs

Cuff zipper
The zipper at the cuff has several purposes. It allows for easier entry into the sleeve, provides extra ventilation on warm days, and allows you to easily wear the glove cuff under your outer shell and over your base layer.

Jeans loop
The loop at the back of this jacket enables you to attach it to your jeans, which prevents the jacket from creeping up: no more exposed back when riding your bike.

Long connection zipper

Short connection zipper

Soft edge at collar
For extra comfort, the inside of the collar is covered with a soft fabric.

Stretchable cuff

Stretch at armholes

Stretch at inside arms

Stretch at shoulders

Stretch at waist

CLIMATE REGULATION

Insulation

Detachable thermal body warmer

Wind catcher behind cuff zipper

Wind catcher behind front zipper
Behind the front a panel has been installed to block the wind.

Ventilation

Perforation on upper back

Perforation on upper front

PROTECTION IN THIS PRODUCT

Protection

Ready for Avertum Tech-Air® airbag system - ONE SIZE UP
Under this garment you can wear our REV'IT! Avertum Tech-Air® Airbag - or a Tech5 airbag - if you purchase the garment one size bigger than your usual size. If you wish to wear a garment that is marked as ""Ready for Avertum Tech-Air® airbag system"", you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation: 1. Measure chest circumference and divide the measurement by two; 2. Measure garment flat on chest line; 3. If the difference between point 1 and point 2 is 12 centimeters or bigger the garment is suitable to wear on top of the airbag. Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.

Prepared for SEESOFT CE-level 1 Divided Insert Chest Protector
The protector pocket in this REV'IT! garment is tailor-made to accommodate the Divided Chest Protector SEESOFT CE-level 1 - an easy upgrade to maximize safety.

Prepared for SEESOFT CE-level 2 Insert Back Protector
The back protector pocket in this REV'IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV - an easy upgrade to maximize safety.

Safety seams
The stitching in motorcycle garments contributes greatly to the abrasion resistance of the total gear. This is why REV'IT! uses safety seams on garment areas at increased risk of impact. Safety seams have a visible as well as an invisible seam. This construction keeps the material of the outer shell together, even when the visible seam is thorn.

SEEFLEX CE-level 2 Elbow Protectors
Certified CE-Level 2 according to the new norm EN1621-1:2012 the SEEFLEX protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX protectors easily surpass the new norm without sacrificing wearer comfort.

SEEFLEX CE-level 2 Shoulder Protectors
Certified CE-Level 2 according to the new norm EN1621-1:2012 the SEEFLEX protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX protectors easily surpass the new norm without sacrificing wearer comfort.

TPU protection at shoulder

Outer shell material

Artificial Leather
A sythetic version of leather with a similar look.

buffalo leather
Buffalo is a type of leather that distinguishes itself from cowhide with a more rugged appearance. The finish provides a classical look, allowing it to age beautifully.

Polyester stretch

Visibility

Laminated reflection on back
Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric.